Ich möchte in deutscher Sprache Lesen
Ich möchte in deutscher Sprache Lesen

True Carbon Trail Wheel

Carbon Trail Wheel from own production made in Germany!!

 

A 32mm Carbon Rim that is robust, lightweight and the most important topic at the developement was to have no "liveless" and "overly stiff" behavior of it. perfect for Tires in a range of 2,25-2,8" with.

 

Primary we would like to build a robust Wheelset, but it should could feel as well a certain dynamic behavior of it. We don´t want to achieve the impact strenght only with adding material with the comon result of a "liveless brick" behavior. After several Test on a special developed Testmachine and as well a lot of Testrides , we could fount the best combination of stiffness (for precise riding)and damping (for better controll and cushioness)

 

This are the uniue features of this Wheels:

  • Developement , testing and production in Germany
  • Damping behavior of the Material and the Layup. On our Testmashine we found out, if we simulate an Impact with 23 Joule, we have resulted on our True Carbon Trail Rim 2000N unlike on an comon Asian made rim 3000N.
  • rounded Flanges on The rim, without any edges prevent "cuts in the Sidewall of Tires"
  • Laminated and not drilled Spokeholes. At the laminating process we stick round inserts between the Fibers, so you haven´t cutted any Fibers and can apply located reinforements for the Spokeholes. This makes this Area much stronger (not longer cracks in this area) and a perfect surface for the nipple. We use on the Driveside around 1300N Spoketension. d
  • handbuildet Wheelsets, much more precise and more equal spoketension make the wheel much more long lasting

 

Hubs:

 

The DT Swiss 350 Hubs are currenly underrated. The same main technical topics like the common 240 Hubs, only a few gramms more that we can compensate with the higher Quality of Spokes.

 

Features:

Ratched (Toothring) Freehub, always full engagement of all teeth instead of the situation with pawl Systems you have themost time only 30% of the pawls propper engaged. This provide always the full engagement and minimize harmful forces in the hub.

 

Big Bearings:

A common way in the Industrie is to use small Bearings on Hubs. Unfortunately they are not strong enough to have a long live in a hub. The DT350 don´t follw this way and take big 6903 Bearings, that should give a long smooth live of the Bearings.

 

The Hubs are prduced in Poland/Europe!

 

Spokes:

DT Swiss Aerolite, one of the spokes with the highest tensile strenght on the market and still one of the lightest steel spokes. Aditional is the spoke flat forged for a aerodynamic design.

 

The Dt Aerolite Spoke is produced in Swizerland (Europe)!

 

Perfect Trail Wheelset, from XC to Enduro use an optimal Wheel for the most people! For sure as well perfect for E-Bike Use!

 

 Wheelset 27,5" ca. 1595gramm

                   29"    ca. 1630gramm

 

 All Parts produced in Europe:

 

Rims: Germany

Hubs: Poland

Spokes: Swizerland

 

True Carbon Trail Wheel

There are different standards and combinations available,  Boost/ Non Boost, Superboost, Mullet option 29/27,5" Mix or as well custom variants with other hubs or colors, please get in touch with me if you want anything others.

1.999,00 €

  • 1,6 kg
  • verfügbar
  • 1 - 3 Tage Lieferzeit